 |
Autotasking – Autotasking
is available for fax signals, dialup modem signals, and
leaseline modem and VFT signals. Most TDM and FDM VFT
signal formats are supported |
|
Signals Processed – The
Model 113A is capable of simultaneous processing of the
following signal types:
 |
Leaseline
Modem: Modem signals include V.22, V.26,
V.27, V.29, and V.33. Demodulation algorithms
and ASCII configuration files are compatible
with PROMOD. Channels can be tasked for autorate
or fixed rate demodulation. Autorate operation
determines the data rate of the modem during
acquisition and tracks modem stepup/fallback
during demodulation |
|
VFT: TDM
VFT signals include R.101A and R.101B partitions
on any modem signal demodulated. FDM VFT signals
include R.35, R.36, R.37, R.38A, R.38B, R.39, V.21,
V.23, Bell 102, Bell 202, and other user-definable
FSK signals |
|
Fax: Fax
signals include G1, G2, G3V.27ter, V.17, V.21,
and V.29 |
|
Dialup Modem: Formats
include V.21, V.22, V.23, V.32, Bell 103, Bell
202, Bell 212, and others |
|
X.50/X.51: X.50
and X.51 signals are demultiplexed, and the resulting
partitions are processed similarly to modems |
|
Voice:
Voice timeslots can be output as formatted packets
to an Ethernet socket. Options are 8-bit PCM, 4-bit
ADPCM, and 2-bit ADPCM |
|
N×64: Direct
digital N×64 channels are demultiplexed and output
to Ethernet sockets. An N×64 channel can be defined
up to N=31, with arbitrary strapping within an
E1 |
|
|
 |
|
Inputs/Outputs – Standard
input is two E1s (62 VGCs) with optional T1 inputs
(48 VGCs). Data output is via Ethernet and/or
RS-232 ports |
|
Control/Status – Control
and status are via Ethernet and/or RS-232. A
PC DOS controller program is provided, using
RS-232 for control. This program can also run
under a PC emulator on a Sun Workstation, using
a local RS-232 port on the workstation |
|
Downloadable
Code – All processing code is
downloaded to the Model 113A from a TCP/IP
network at power-up. No EPROM replacement or
Model 113A chassis access is required for firmware
and software upgrades |
|
Physical – 5.25-inch-high
rack-mount chassis, 40 lb |
|
|
